Are you facing problems with SPD devices? We are presenting a driver tool which is for connecting SPD device with Windows computer without the need of ADB or another driver. With this Driver, you can unlock, repair IMEI, flash SPD devices and so on. In this article, we are going to write about the installation process of SPD Driver 7731 with the download link.
SPD SCI Android USB driver Jungo-v4: Download Link
Features of SPD drivers
- Easy to use,
- Manual installation,
- Write IMEI,
- Flash stock ROM,
- Unlock SPD devices,
- Support all box software.
DOWNLOAD SPD Driver For Windows XP, Win7, Win8 Support: Link
All in One Driver Collection: Download
- Download Android USB Spreadtrum Drivers
- Download SCI android USB driver Jungo v4
- Disable execution of driver signature verification if you are using a Windows 7, 8, 8.1 or 10 PC.
- Configure ADB
- SPD Phone
- PC or laptop with internet connection
How to install SPD USB Driver
Steps to Manually Install Spreadtrum Drivers on a Windows PC:
- Unzip the Android USB driver Jungo v4 to get your content
- Open the SCI-android-usb-driver-jungo-v4> x64 folder (if you are using a 64-bit PC) or x86 (if you are using a 32-bit PC)
- Start DPInst.exe and follow the driver installation wizard
- Unzip the SciU2S Android USB Spreadtrum Drivers zip file to get your content
- In Windows, go to the Control Panel and open the Device Manager
- Click any of the device groups (any of the items in the list) that you see, then in the Action menu at the top select Add Legacy Hardware.
- The Add Hardware Wizard starts, click next.
- Select Install hardware that you manually select from a list (Advanced), and then click Next.
- Click Have Disk…
- Click Browse … and locate your driver’s .inf file, and select it (Spreadtrum Drivers> SciU2S> x86 / x64 for 32-bit / 64-bit PC respectively> driver> SciU2S.inf)
- Click Open and OK. You will see the drivers listed
- Select your driver (SCI Android USB2Serial) and click on NexT
- Click Next
- Click Finish
Our drivers should now appear in the list. Repeat the procedure for Spreadtrum drivers> google-usb_driver> android_winusb.inf.
Go to C: / Users / your-user-directory / .android / adb_usb.ini and open it with any text editor such as Notepad or Notepad ++.
Add the following code to a new line (This is Spreadtrum’s USB Vendor ID).“0x1782”
Connect the phone to the PC without the battery inside (shutdown is good if the battery is not removable) and Windows will install some additional drivers.
Install SPD Driver win7
SPD driver can be easily installed in Windows 7 PC. Download SPD USB Driver Windows 7 32bit from here. Unzip the file and run the installation process. Deactivate antivirus form your PC. Otherwise, it will block installation.
Also Download: Chimera Tool
Phone Flashing with SPD Driver
- Download and unzip Firmware, tools, applications, and drivers that will be used.
- The first thing is to install the corresponding drivers for the equipment.
- We run the application as administrator, to load the firmware of the equipment.
- We load the file .pac (Firmware) and execute play in the application.
- Now with the battery placed on the phone and pressing vol + or vol -. It depends on the architecture of the phone that we are flashing and if the drivers are well loaded on the PC, they will start loading the SW.
- Charging the SW will take 2 or 3 min. Then a message (PASS) will appear in green indicating that loading has been successful.
- We carry out a hard reset to the equipment.
SPD Driver 32 bit and 64-bit support SPD flash tool. It also supports box software like volcano box, miracle box, infinity box, etc. It also read security code and phone information of MTK, SPD and Coolsand CPU devices. Backup all important data and deactivate antivirus during work. Download SPD USB Driver from here and don’t forget to share.